CONNECTING RNS-510
(CARS EQUIPED WITH 3RD GENERATION SYSTEMS)
In case your old audio system has the same wiring as the RNS-510, just stay connected and mount the GPS antenna!
1. Attach the double-sided adhesive tape to the GPS antenna.
2. Place the antenna in the space above the audio system, you will feel that there is a large gap there (under the air ducts). Make sure the GPS cable is hidden to the right so there is no problem after putting in the RNS. Alternatively, the GPS antenna can be inserted into the A-Pillar or on the dashboard. The latter solution is the most efficient but at the same time more unattractive as the antenna looks and is difficult to install. For instructions on removing plastic pieces, you can see the bluetooth installation presentation.
3. Connect the cables to the RNS-510 (make sure they snap correctly).
4. Push the RNS inwards.
5. Screw the 4 screws with the Torx screwdriver.
6. Place the plastic cover.
7. That's it!